English
English
français (Canada)
Go

VJPFPM2550T-2/4

100HP, 3530RPM, 3PH, 60HZ, 365JP, 4260M, OPSB

Product Information Packet PDF

Ship Weight 523.000 LB
UPC 781568816929

Specs

Catalog Number VJPFPM2550T-2/4
Enclosure OPSB
Frame 365JP
Frame Material Steel
Frequency 60.00 Hz
Motor Letter Type Three Phase
Output @ Frequency 100.000 HP @ 60 HZ
Phase 3
Synchronous Speed @ Frequency 3600 RPM @ 60 HZ
Voltage @ Frequency 200.0 V @ 60 HZ
400.0 V @ 60 HZ
Agency Approvals CULUS
CSA EEV
Ambient Temperature 40 °C
Auxillary Box No Auxillary Box
Auxillary Box Lead Termination None
Base Indicator No Mounting
Bearing Grease Type Polyrex EM (-20F +300F)
Blower None
Current @ Voltage 130.000 A @ 400.0 V
260.000 A @ 200.0 V
Design Code B
Drip Cover Drip Cover
Duty Rating CONT
Efficiency @ 100% Load 93.0 %
Electrically Isolated Bearing Not Electrically Isolated
Feedback Device NO FEEDBACK
High Voltage Full Load Amps 130.0 a
Front Face Code Standard
Front Shaft Indicator None
Heater Indicator No Heater
Insulation Class F
Inverter Code Not Inverter
KVA Code F
Lifting Lugs Vertical Lifting Lugs
Locked Bearing Indicator Locked Bearing
Motor Lead Exit Ko Box
Motor Lead Termination Flying Leads
Motor Lead Quantity/Wire Size 12 @ 6 AWG
Motor Type 4260M
Mounting Arrangement F1
Number of Poles 2
Overall Length 33.50 IN
Power Factor 89
Product Family Fire Pump Motor
Pulley End Bearing Type Ball
Pulley Face Code C-Face
Pulley Shaft Indicator Tapped & Key
Rodent Screen Included
Service Factor 1.15
Shaft Diameter 1.577 IN
Shaft Extension Location Pulley End
Shaft Ground Indicator No Shaft Grounding
Shaft Rotation Reversible
Shaft Slinger Indicator Shaft Slinger
Speed 3530 rpm
Speed Code Single Speed
Motor Standards NEMA
Starting Method Wye Start - Delta Run
Thermal Device - Bearing None
Thermal Device - Winding None
Vibration Sensor Indicator No Vibration Sensor
Winding Thermal 1 None
Winding Thermal 2 None

Drawings

{{getDrwKindName(drawing.kind)}}

CAD File
Drawing files for this product are currently unavailable.
For additional assistance, please contact your local Baldor sales office.
The drawing for the product you have selected is available from our Part Community Portal.
Visit our portal by following the link below. For additional service, please contact a local sales office.
CAD files for this product are currently unavailable.
Visit one of our Part Community Portals for further assistance.
CAD files for this product are currently unavailable.
Visit our Part Community Portal for further assistance.
CAD files for this product are currently unavailable.
For additional assistance, please contact your local Baldor sales office.
Your download is ready. Thank you.
For additional assistance, please contact your local Baldor sales office.
Building download package.

Nameplate

CAT.NO. VJPFPM2550T-2/4 CUST P/N I.P. 23
SPEC. 42E361W983H2 SER.NO. FRAME 365JP
HZ 60 HP 100 RPM 3530 HZ HP RPM
VOLTS 200/400 CODE F VOLTS CODE
AMPS 260/130 DES B AMPS DES
EFF 93 SER.F. 1.15 PF 89 EFF SER.F. PF
RATING 40C AMB-CONT DE BRG 6313 GREASE POLYREX EM
BLANK ODE BRG 6311 MTR. WT. 523
CLASS F PH 3
ENCL OPSB CC 010A
HTR-VOLTS HTR-AMPS HTR-WATTS
NP3454L

Performance

Performance at 400 V, 60 Hz, 100 hp

Typical performance; not guaranteed values.

General Characteristics

Full Load Torque 0 LB-FT
No-Load Current 0 A
Line-Line Res. @ 25° C 0.0458 Ohms A Ph / 0 Ohms B Ph
Temp. Rise @ Rated Load 56° C
Temp. Rise @ S.F. Load 67° C
Start Configuration DOL
Break-Down Torque 511 LB-FT
Pull-Up Torque 203 LB-FT
Locked-Rotor Torque 247 LB-FT
Starting Current 795 A

Load Characteristics

Rated Load 0% 25% 50% 75% 100% 125% 150% S.F.
Power Factor 7.0 66.0 83.0 87.0 89.0 88.0 87.0 88.0
Efficiency 0.0 91.9 94.0 94.0 93.2 92.2 90.7 92.6
Speed (RPM) 3,599 3,587 3,572 3,555 3,536 3,515 3,491 3,523
Line Amps 30.80 44.70 69.60 98.80 130.00 164.00 201.00 150.00

Performance Curves

Parts

Part Number Description Quantity
HW1001A31 LOCKWASHER 5/16, ZINC PLT.591 OD, .319 I 2.000 EA
HW1001A31 LOCKWASHER 5/16, ZINC PLT.591 OD, .319 I 4.000 EA
HW1001A31 LOCKWASHER 5/16, ZINC PLT.591 OD, .319 I 4.000 EA
LB1624 COMBINED WARNING LABEL, ISO/ANSI PICTOGR 1.000 EA
MN416A01 TAG-INSTAL-MAINT no wire (2100bx)4/22 1.000 EA