DC Servo Drive

The UM/UL series from Baldor is a DC servo drive providing control for a wide range of Baldor DC servo motors such as the M3300, M4000, and M4500 motors.

Providing 600 watts thru 2.25 Kw, the UM comes in models providing 6 amp and 15 amp continuous, with peak currents of 15 and 30 amp. The UM is a fully protected unit and has protection against over voltage, surge current, over temperature, ground faults and logic fault.

The UM is an open chassis multi-axis configuration, typically containing one to six control cards which are inserted onto the chassis. The chassis includes the power supply and associated hardware.

Easily interfaces with today’s motion controllers, the UM accepts the industry standard +/- 10 Vdc input command, tachometer feedback, and will operate in either velocity or current mode.

A version/model of the UM is the “LD” series that accepts 115 Vac direct, providing 160 Vdc bus. It is available in 1 or 2 axis.

Click here for an overview of Baldor's full line of Servo / Motion solutions.

Features:

• Multi-axis servo control – up to 6 axis
• 6 and 15 amp continuous – with peak = 2 times continuous
• Models providing 100 and 150 volt bus
• Easy interfaces with today’s motion controllers
• Simple easy adjustments
• LED status indicators
• Fully protected unit – excessive current, voltage error, ground fault, surge current overtemperature
• Available I/O – overtravel, remote reset, enable, +/-15Vdc output, motor current monitor, externally adjustable current, differential or single ended, auxiliary command input.
• Test points and reset button
• Economical chassis mount configuration

Literature:

UM/LD Servo Drives - Technical Specs   Literature Number: BR1202-F UM Installation & Operating Manual   Literature Number: MN1213 LD Installation & Operating Manual   Literature Number: MN1269

Ordering Information:

Catalog Number

Description

UM1506HS-100

6 amp servo card for 70 Vac chassis

UM3015HS-100

15 amp servo card for 70 Vac chassis

UM3015HS-150

15 amp servo card for 105 Vac chassis

UM2-100-1

chassis for 2 control cards; Input = 70Vac

UM4-100-2

chassis for 4 control cards; Input = 70Vac

UM6-100-2

chassis for 6 control cards; Input = 70Vac

UM2-150-1

chassis for 2 control cards; Input = 105Vac

UM4-150-2

chassis for 4 control cards; Input = 105Vac

UM6-150-2

chassis for 6 control cards; Input = 105Vac

UM2-100-1-10S

1 Axis servo control - 6 amp cont; Chassis 70Vac input

UM2-100-1-20S

2 Axis servo control - 6 amp cont; Chassis 70Vac input

UM4-100-2-30S

3 Axis servo control - 6 amp cont; Chassis 70Vac input

UM4-100-2-40S

4 Axis servo control - 6 amp cont; Chassis 70Vac input

UM6-100-2-50S

5 Axis servo control - 6 amp cont; Chassis 70Vac input

UM6-100-2-60S

6 Axis servo control - 6 amp cont; Chassis 70Vac input

UM2-100-1-01S

1 Axis servo control - 15 amp cont; Chassis 70Vac input

UM2-100-1-02S

2 Axis servo control - 15 amp cont; Chassis 70Vac input

UM4-100-2-03S

3 Axis servo control - 15 amp cont; Chassis 70Vac input

UM4-100-2-04S

4 Axis servo control - 15 amp cont; Chassis 70Vac input

UM6-100-2-05S

5 Axis servo control - 15 amp cont; Chassis 70Vac input

UM6-100-2-06S

6 Axis servo control - 15 amp cont; Chassis 70Vac input

UM2-150-1-01S

1 Axis servo control - 15 amp cont; Chassis 105Vac input

UM2-150-1-02S

2 Axis servo control - 15 amp cont; Chassis 105Vac input

UM4-150-2-03S

3 Axis servo control - 15 amp cont; Chassis 105Vac input

UM4-150-2-04S

4 Axis servo control - 15 amp cont; Chassis 105Vac input

UM6-150-2-05S

5 Axis servo control - 15 amp cont; Chassis 105Vac input

UM6-150-2-06S

6 Axis servo control - 15 amp cont; Chassis 105Vac input

LD2-01S

1 Axis servo control - 15 amp cont;Chassis 115 Vac input

LD2-02S

2 Axis servo control - 15 amp cont;Chassis 115 Vac input